Skip to main content

Hull fouling used to be a fuel problem that every owner handled in their own way. It is now turning into a compliance matter. In April 2025 the IMO approved its first dedicated guidance on in-water cleaning, MEPC.1/Circ.918. One year later, MEPC 84 agreed to develop a standalone, legally binding instrument on biofouling, with a draft targeted for 2029.

Nothing is mandatory at IMO level yet. But Brazil, Australia, New Zealand and California already enforce their own rules, and they use the IMO vocabulary: Biofouling Management Plan, Biofouling Record Book, fouling rating, cleaning with capture. This article explains what the guidance says, where the binding rules stand, and what a shipowner or technical manager should have in place now.

Key Takeaways

  • The IMO in-water cleaning guidance is MEPC.1/Circ.918. MEPC 83 approved it in April 2025. It is voluntary and supports the 2023 Biofouling Guidelines.
  • Capture is the preferred method. Cleaning without capture is foreseen only for light fouling (rating below 2), or in narrow cases accepted by the local authority.
  • Binding rules are coming, but not soon. MEPC 84 (27 April to 1 May 2026) agreed on a standalone legal instrument. The aim is a draft by 2029.
  • Regional rules bite today. Brazil, Australia, New Zealand and California already ask for plans, records and clean hulls.
  • Paperwork is the common thread. A ship-specific Biofouling Management Plan, an up-to-date Biofouling Record Book and proper cleaning reports satisfy most regimes.
Diver cleaning biofouling from a ship's hull with a rotary brush during in-water cleaning

What Are the IMO Biofouling Rules Today?

Today the IMO rules on biofouling are recommendations, not law. The reference text is the 2023 Biofouling Guidelines, adopted in July 2023 as resolution MEPC.378(80). They replaced the first guidelines from 2011 (resolution MEPC.207(62)).

Two concerns drive the work:

  • Invasive species. Organisms attached to the hull and niche areas travel with the ship and can settle in new waters.
  • Fuel and emissions. A study released under the IMO-backed GloFouling project found that a slime layer only 0.5 mm thick, covering up to half the hull, can raise greenhouse gas emissions by 20 to 25 percent. Light barnacle or tubeworm growth can push the figure to 55 percent for an average containership (Professional Mariner).

The 2023 Guidelines ask each ship to hold two documents, as summarised by ABS:

  • Biofouling Management Plan (BFMP). Ship-specific. It covers the anti-fouling system, operating profile, niche areas, inspection schedule, cleaning regime and contingency actions.
  • Biofouling Record Book (BFRB). The log of inspections, cleanings, coating repairs and lay-up periods, with the reports attached.

Inspections are scheduled by risk rather than by fixed interval. A ship that idles in warm water needs to be looked at sooner than one in steady service.

The IMO Fouling Rating Scale

The Guidelines grade every inspected area from 0 to 4. This scale matters because the in-water cleaning guidance is built on it.

Rating Condition Macrofouling cover Recommended action
0 No fouling None None
1 Microfouling (slime) only None Proactive cleaning
2 Light macrofouling 1–15% Cleaning with capture, shorter inspection interval
3 Medium macrofouling 16–40% As rating 2
4 Heavy macrofouling 41–100% As rating 2

If the coating has badly deteriorated at ratings 2 to 4, the Guidelines point to dry docking and renewal of the anti-fouling system instead of repeated cleaning.

What Does the IMO In-Water Cleaning Guidance (MEPC.1/Circ.918) Say?

The guidance sets out how an in-water hull cleaning should be planned, carried out, documented and approved so that it does not spread organisms, release coating waste or damage the anti-fouling system. MEPC 83 approved it in April 2025 and the circular is dated 29 April 2025. The full text is on the IMO site: MEPC.1/Circ.918.

It is voluntary, and it repeats throughout that local regulations come first. Its practical value is that port States now have a common template when they write their own approval rules.

Proactive vs Reactive Cleaning

The guidance separates two types of work:

  • Proactive cleaning removes microfouling (slime) at regular intervals, before macrofouling can establish.
  • Reactive cleaning removes micro- and macrofouling as a corrective action once it is already there.

The distinction decides the equipment, the environmental risk and, in many ports, whether a permit will be granted at all.

When Is Capture Expected?

Cleaning with capture is the preferred method for both slime and macrofouling, because debris and coating particles are collected instead of released. Cleaning without capture is foreseen only where local rules permit it and the authority accepts the location, and only in two cases:

  • the area has a fouling rating below 2, or
  • the fouling is heavier, but the hull has a non-biocidal hard coating in good condition and the growth comes from the same waters. The BFMP and BFRB must prove this to the authority.

What Happens Before, During and After a Cleaning?

  1. Arranging. The owner tells the service provider about the coating, the areas to clean or avoid and earlier reports. The provider states its equipment, waste handling and the permits needed.
  2. Cleaning plan. The provider prepares a plan covering the operation, safety and contingencies, and submits it to the ship and the authority.
  3. Pre-cleaning inspection. Required before work starts. An inspection report from the last 28 days may be used instead. Areas rated above 1 are not cleaned without capture.
  4. During cleaning. The provider monitors the system and live video, and reports any deviation to the ship and the authority. Cameras record at 1280 x 720 pixels or better, with time and date stamps.
  5. Post-cleaning inspection. It documents the result. Before lock-outs are released, the ship confirms that gratings are back in place and divers and equipment are out of the water.

What Should the Cleaning Report and Records Contain?

The service provider issues a cleaning report in the format of the 2023 Guidelines. If the job was not finished, the report shows where cleaning started and stopped and why, in enough detail for another provider to continue.

Record keeping is split in two:

  • The service provider keeps coordination documents, photos, videos and waste disposal records for at least two years.
  • The ship makes the BFRB entry and keeps the full inspection reports and videos until a new hull coating is applied.

How Are Cleaning Systems Tested and Approved?

The guidance gives authorities a route to certify in-water cleaning systems. Testing is done by an independent, accredited organisation on at least three different ships. A system must clean to rating 1 or better without visibly damaging compatible coatings, and must not significantly raise biocide, plastic or microplastic levels in the surrounding water.

Systems with capture have one more condition: only particles smaller than 10 micrometres may be released. Certificates are normally valid for no more than five years. Coating makers are also expected to publish which cleaning methods suit their products, so compatibility can be checked before a brush touches the hull.

When Will Biofouling Rules Become Mandatory?

There is no entry-into-force date yet. The IMO aims to finalise a draft legal framework by 2029, for consideration at MEPC 89 (DNV). Adoption and ratification come after that, so global mandatory rules are unlikely before the 2030s.

Date Body What happened or is planned
July 2011 MEPC 62 First Biofouling Guidelines adopted
July 2023 MEPC 80 Revised Guidelines adopted, resolution MEPC.378(80)
April 2025 MEPC 83 In-water cleaning guidance approved; work on a legally binding framework agreed
February 2026 PPR 13 Sub-committee recommends a standalone instrument
April–May 2026 MEPC 84 Standalone instrument confirmed; correspondence group set up
Early 2027 PPR 14 Correspondence group reports on structure, guidelines and work plan
2029 MEPC 89 Target for a finalised draft

MEPC 84 settled the form. The framework will be a standalone instrument, not an amendment to an existing convention, and a correspondence group is now drafting its structure, the list of supporting guidelines and a work plan (ClassNK).

What Is the Instrument Expected to Cover?

According to BIMCO, the instrument should carry the usual convention machinery: testing, surveys, certification, inspections, record keeping and enforcement. It may also look beyond invasive species, to microplastics and hazardous substances released during cleaning, greenhouse gas emissions and underwater noise.

What Is Still Open?

The hard questions are operational, and owners have raised them early:

  • How clean is clean? BIMCO warns that a permitted fouling level set too low could cause major disruption.
  • Where can a ship be cleaned? Reactive cleaning has to be available worldwide for a mandatory regime to work.
  • Who inspects, and how? Industry wants one harmonised, risk-based inspection regime.
  • Is proactive cleaning allowed everywhere? Whether and where it is permitted remains undecided.

INTERCARGO has added that dry bulk ships often wait for weeks at warm-water anchorages, and need rules they can realistically meet (Riviera).

Diver recording a pre-cleaning underwater inspection of a ship's sea chest grating

Which Countries Already Enforce Biofouling Rules?

Four jurisdictions already apply binding requirements to arriving ships, and Norway has proposed national hull biofouling rules of its own. For a ship trading worldwide, these regimes are the real deadline, not the IMO instrument.

Jurisdiction Applies to Core requirement
New Zealand All international arrivals A clean hull on arrival. Short-stay commercial ships can comply through continual maintenance: anti-fouling coating, BFMP, BFRB, regular inspection and cleaning. Other options are cleaning within 30 days before arrival or a booked haul-out within 24 hours.
Australia All international arrivals Pre-arrival reporting of biofouling management. Regulations in force since 15 June 2022; the education phase ended on 15 December 2023. Accepted routes include an effective BFMP and BFRB, or a full clean within 30 days before arrival.
California Ships of 300 GRT and above able to carry ballast water Ship-specific plan and record book, niche area management, annual reporting form. Extra measures after 45 days or more in one location.
Brazil Vessels over 24 m entering Brazilian waters BFMP and BFRB, and hull fouling no higher than level 1 on entry. In-water cleaning needs prior authorisation from the Maritime Authority. Penalties apply from 10 January 2028.

The pattern is consistent. Every regime asks for the same two documents and for evidence of the last inspection or cleaning. A cleaning report that follows the IMO format is therefore useful well beyond the port where the work was done.

What Should Shipowners Do Now?

Prepare as if the documents were already mandatory, because for many trades they are. Seven steps cover most of the exposure:

  1. Make the BFMP ship-specific. A generic fleet template does not reflect the actual coating, operating profile and niche areas, and regional authorities check for exactly that.
  2. Keep the BFRB current. Log every inspection, cleaning, coating repair and long idle period, and attach the reports.
  3. Inspect by risk. Bring the next inspection forward after lay-up, slow steaming or a long stay at a warm-water anchorage.
  4. Clean early. Slime at rating 1 is the easiest to remove and the easiest to get permitted. Once fouling reaches rating 2, the guidance expects capture.
  5. Check coating compatibility first. Ask the paint maker which cleaning methods suit the anti-fouling system, and share that with the diving company before the job.
  6. Demand a proper cleaning report. It should include pre- and post-cleaning inspection results, time-stamped photos or video, the areas cleaned and any areas left out.
  7. Check the destination before fixing. New Zealand, Australia, California and Brazil each have their own evidence requirements and lead times.

Propeller condition belongs in the same routine. The fuel case is covered in our article on underwater propeller polishing, and the basics of fouling control in Preventing Biofouling: Why It Matters and How to Control It.

In-Water Hull Cleaning in Istanbul and the Turkish Straits

Istanbul sits on the route between the Black Sea and the Mediterranean, so a ship can have its hull inspected and cleaned during a call or a transit stop instead of deviating to a yard. That timing is useful when the next destination asks for recent evidence of a clean hull.

Weser Maritim carries out underwater hull cleaning and propeller polishing in Istanbul and the Turkish Straits, following the same sequence the IMO guidance describes:

  • Inspection first. Divers assess the type and extent of fouling and the condition of the anti-fouling and anti-corrosion coatings before a method is chosen.
  • Method matched to the coating. Rotary brush systems with adjustable pressure for general areas, hand tools for niche areas, and calibrated high-pressure water jetting for stubborn growth.
  • Niche areas included. Sea chests, rudders and propellers are cleaned as part of the same attendance.
  • Documented result. A post-cleaning inspection and a report with before-and-after photos, ready to be filed with the Biofouling Record Book.

Where class or a port State wants independent evidence of hull condition, the cleaning can be combined with a class-approved underwater inspection and survey. If the inspection shows that the coating itself has failed, painting and coating work at the next docking is the lasting fix.

As the IMO guidance stresses, local rules decide what is permitted in each port. Agree the permit lead time with your agent and the service provider before the ship arrives.

Frequently Asked Questions

Is the IMO In-Water Cleaning Guidance Mandatory?

No. MEPC.1/Circ.918 is voluntary guidance that supports the 2023 Biofouling Guidelines, which are also voluntary. Port and coastal States can adopt its procedures in their own rules, and several already regulate in-water cleaning locally.

What Is MEPC.1/Circ.918?

It is the IMO circular titled Guidance on in-water cleaning of ships’ biofouling. MEPC 83 approved it in April 2025. It covers planning, inspection, cleaning with and without capture, reporting, approval of service providers and testing of cleaning systems.

When Will the Binding IMO Biofouling Instrument Enter Into Force?

No date has been set. MEPC 84 agreed in 2026 that it will be a standalone instrument, and the aim is a finalised draft by 2029. After adoption, an IMO instrument still needs ratification by member States before it applies.

What Is the Difference Between Proactive and Reactive Hull Cleaning?

Proactive cleaning removes the slime layer at regular intervals so that barnacles and other macrofouling cannot establish. Reactive cleaning removes fouling that has already developed. Reactive cleaning carries more environmental risk, so capture is expected.

Does Every In-Water Cleaning Need Debris Capture?

Not under the IMO guidance. Cleaning without capture is foreseen for areas with a fouling rating below 2, where local rules permit it and the authority accepts the location. For heavier fouling, capture is the expected method, with one narrow exception for hard non-biocidal coatings fouled in the same waters.

Which Documents Will a Port State Ask For?

Typically the Biofouling Management Plan, the Biofouling Record Book, the latest inspection or cleaning report and details of the anti-fouling coating. New Zealand also lists dry docking reports and antifouling certificates as accepted evidence.

This article is provided by Weser Maritim for general information only. It summarises IMO documents and national requirements as they stood in November 2026 and is not legal, regulatory or technical advice. Biofouling and in-water cleaning rules differ between jurisdictions and change over time. Always confirm the current requirements with the flag State, the classification society and the authorities of the destination port before planning a cleaning or a voyage. Weser Maritim accepts no liability for decisions made on the basis of this article. Links to third-party websites are given for reference, and Weser Maritim is not responsible for their content.

Conclusion

The IMO in-water cleaning guidance is voluntary today, and the binding biofouling instrument is still years away. The direction is already fixed, though: a ship-specific plan, a complete record book and documented cleanings are what regional authorities ask for now and what the future instrument is being built around.

Owners who clean early, match the method to the coating and keep proper reports will meet the regional rules in force today and be ready when the IMO rules arrive.

To plan a hull inspection or cleaning around your next Istanbul call, contact Weser Maritim at technical@wesermaritim.com or +90 505 414 80 99.